Product ID:284364C91 KIT,TIGER HAIR,POLYESTER RESIN,PA
MSDS Date:08/29/1988
FSC:2510
NIIN:00-174-3413
Kit Part:Y
MSDS Number: BJQNG

FIBRE GLASS-EVERCOAT CO.,INC.

6600 CORNELL ROAD
CINCINNATI, OH 45242-2033
US

Emergency Phone: 513-489-7600

Info Phone: 513-489-7600

Cage: 18731

NAVISTAR INTERNATIONAL CORP., TRUCK BRANCH, OHIO

600 SPRINGFIELD, OH 45501 US

Telephone: 312-836-2000

Cage: 89346

STYRENE, MONOMER (SARA III)

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: <40%

OSHA PEL 100 PPM

ACGIH TLV: S,50PPM/100STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

UNSATURATED POLYESTER RESIN

Fraction By Weight: >60%

LD50 LC50 Mixture:ORAL LD50 (RAT) IS 5000 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: ACUTE: IRRITATION TO
RESPIRATORY TRACT. CHRONIC: MAY CAUSE LIVER AND KIDNEY DAMAGE.
VAPOR OR MISTS ARE EXTREMELY IRRITATING TO EYES, MUCOUS MEMBRANES
AND UPPER RESPIRATORY TRACT. INGESTION : MAY BE HARMFUL. SKIN:
ACUTE: MAY BE ABSORBED THROUGH THE SKIN IN TOXIC AMOUNTS. CHRONIC:
MAY CAUSE DERMITIS.
Explanation of Carcinogenicity:IARC HAS CLASSIFIED STYRENE AS A
POSSIBLE HUMAN CARCINOGEN (CLASS 2-B). THIS IS BASED ON NEW
CLASSIFICATION SCHEME.
Effects of Overexposure:SKIN: MAY CAUSE DEFATTING, DRYNESS WITH
IRRITATION AND POSSIBLE DERMATITIS. STYRENE MAY BE ABSORBED THROUGH
THE SKIN IN TOXIC AMOUNTS. EYES: MAY CAUSE TEARING AND IRRITATION.
INHALATION: VAPORS MAY CA USE NOSE, THROAT, AND RESPIRATORY
TRACTIRRITATION. MAY CAUSE HEADACHE AND NAUSEA. INGESTION: GI
DISTURBANCES AND PAIN.
Medical Cond Aggravated by Exposure:PERSONS WITH A HISTORY OF SKIN,
KIDNEY OR LIVER DISORDERS MAY BE AT INCREASED RISK WHEN USING THIS
MATERIAL.

First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES. GET MEDICAL ATTENTION.
SKIN: WASH WITH SOAP AND WATER. INHALATION: REMOVE VICTIM TO FRESH
AIR. IF VICTIM IS UNCONSCIOUS, GIVE ARTIFICIAL RESPIRATION OR
OXYGEN AS NEEDED. GET MEDICAL ATTENTION. INGESTION: DO NOT INDUCE
VOMITING (ASPIRATION HAZARD). GET MEDICAL ATTENTION.

Flash Point Method:CC
Flash Point:98.0F,36.7C
Autoignition Temp:Autoignition Temp Text:914F
Lower Limits:1.1
Upper Limits:6.1
Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. COOL FIRE EXPOSED
CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:AT ELEVATED TEMPERATURES SUCH AS IN A
FIRE, POLYMERIZATION MAY TAKE PLACE. IF CONTAINED, VIOLENT RUPTURE
MAY RESULT.

Spill Release Procedures:VENTILATE AREA. USE APPROPIATE PROTECTIVE
CLOTHING AND EQUIPMENT. ABSORB IN INERT MATERIAL SUCH AS
VERMICULITE OR SAND, AND PLACE IN APPROPIATE DISPOSAL CONTAINER AND
SEAL. FLUSH AREA WITH PLENTY OF W ATER.
Neutralizing Agent:SMALL QUANTITIES CAN BE REACTED WITH THE APPROPRIATE
HARDENER TO SOLIDIFY.

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS, AND
FLAMES. STORE BELOW 100 DEG F IN A DRY, WELL-VENTILATED AREA AWAY
FROM LIGHT. KEEP ORGINAL CONTAINERS TIGHTLY CLOSED.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Respiratory Protection:WEAR A NIOSH-APPROVED RESPIRATOR APPROPRIATE FOR
EMISSION LEVELS. AN APPROPRIATE RESPIRATOR IS THE CARTRIDGE
EQUIPPED FOR ORGANIC VAPORS/MISTS AND A DUST MASK WHEN SANDING
CURED PRODUCT.
Ventilation:LOCAL MECHANICAL EXHAUST VENTILATION CAPABLE OF MAINTAINING
EMISSIONS AT THE POINT OF USE BELOW THE TLV.
Protective Gloves:PVA OR VITON GLOVES RECOMMENDED.
Eye Protection:CHEMICAL GOGGLES OR FACESHIELD.
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. DO NOT GET IN
EYES, ON SKIN OR ON CLOTHING. LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
KEY1:F3. THIS IS PART B OF A 5 PART KIT. SEE OTHER PART NUMBER
INDICATORS, SAME NSN FOR OTHER PARTS.

HCC:F3
Boiling Pt:=146.1C, 295.F
Vapor Pres:4.3
Vapor Density:>1
Spec Gravity:1.56
Evaporation Rate & Reference:<1 (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:FIBROUS THICK PUTTY, SHARP ODOR.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS AND STRONG ACIDS.
Stability Condition to Avoid:HEAT AND DIRECT SUNLIGHT
Hazardous Decomposition Products:HEATING TO DECOMPOSITION MAY CAUSE THE
EMISSION OF IRRITATING ACRID FUMES.
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES, SUCH AS IN
FIRE CONDITIONS.

Waste Disposal Methods:DISPOSE OF CONTAMINATED PRODUCT AND MATERIALS
USED IN CLEANING UP SPILLS OR LEAKS IN ACCORDANCE WITH ALL
APPLICABLE FEDERAL, STATE, AND LOCAL REGULATIONS. NOTE: EMPTY
CONTAINERS CAN HAVE RESIDUES SUBJ ECT TO PROPER WASTE DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.